|
.jpg)
PE 100
FloorMate Temporary Floor
Tape
|
|
Specialty grade, low adhesion
polyethylene masking tape designed for temporarily securing protective floor
coverings to coated and cured wood floor finishes in residential and commercial
applications, and can also be used on gym floors for temporary court marking, as
well as on tile and other floor surfaces. PE 100 FloorMate® Temporary Floor Tape is
durable to withstand heavy traffic, offers 30-day clean removal without leaving
behind a residue or surface damage when removed from properly prepared/cured wood
finishes, is conformable to create curves and will not tear or splinter.
|
- FloorMate®
Temporary Floor Tape
- Specialty grade polyethylene masking
tape
- Low adhesion
- Conformable and can create smooth, curved
lines
- Will not tear or splinter
|
Properties & Technical Data
|
Property |
Standard |
Metric |
|
Adhesion to Stainless Steel |
15 oz/in width |
1.64 N/10 mm |
|
Elongation |
500% |
500% |
|
Service Temperature Range |
32 F to 160 F |
0 C to 71 C |
|
Tensile |
11 lbs/in width |
19.3 N/10 mm |
|
Thickness |
4.6 mils |
0.12 mm |
|
Water Vapor Transmission Rate |
0.4 gm/100 sq in/24 hr |
6.2 gm/msq/24 hr |
|
|
Typical Applications
- For use on properly prepared and cured wood floor
finishes
- Also used as a gym floor marking tape for creating temporary lines and
boundaries
- Can also be used on other hard flooring surfaces, including sheet vinyl,
wood laminates, engineered hardwood, tile, marble and granite
- CAUTION: Test tape in an inconspicuous area before using. Temporary use
only. Finish damage is difficult/expensive to repair on wood floors, so assure
preparation and finish application are done per finish manufacturer's
recommendations. Allow finish to cure fully before applying tape. Remove tape
slowly prior to 30 days on the floor. Please refer to the list of Lab-Tested
Finishes
|
|
Colours Available:
|
|
- Lengths Available: 60.1 yd
- Widths Available: 1.88 in, 2.83
in
|
|
Available By The Case
|
.png)
